How To Refill An Hp21 Inkjet Cartridge
Printers are not the main cost when you purchase a printer. The printer is a one time purchase, but to keep the printer running you must constantly purchase ink cartridge. Replacing empty ink cartridges can get rather expensive, especially replacing the Hp21 inkjet cartridge. Although you do need ink for the printer to run you don't have to break the bank to keep it up and running. Many companies now offer refill kits that help you save money. Not only do the kits help you save money, but they also help save the earth. In this article you will learn how to refill an Hp21 inkjet cartridge and you'll see that it's not as hard as it sounds. You'll be wishing you tried this sooner! The first step is to remove the HP label that is on the top of the Hp21 inkjet cartridge. This label is the one that states the number of the cartridge. Do not throw it away, just set it aside for now. Next you will want to make sure that you have a clean work space. This work space should also be covered in old newspaper or paper towels so that you have an area that's easy clean up. The refill kit should have come with a pair of disposable gloves to prevent the ink for getting on your hands. You now want to put the gloves on. Take the syringe out of the packaging and assemble it by putting the needle onto the end that it needs to be on. Open the first color that you are going to use to fill and put the syringe into the ink. Fill the syringe about 1/2 to 3/4 of the way full. The holes of the cartridge should be exposed and this is where you insert the needle and slowly fill up to 20 ml of ink into it. It's very important to stop filling if you see a small amount of ink start to leak out. Now you want to take the HP label that you took off in the very beginning and place it back over the holes. You can also add a piece of tape over the label if it doesn't want to stick. You are now ready to test the cartridge to see if you followed the instructions properly! Your printer has a test that it can run and you'll want to do this right away. You might need to do the test a couple times to make sure that it works properly. Once you know that the cartridge is going to work properly you will want to clean up your area. When refilling a cartridge that has multiple colors of toner in it you will want to test the refill hole before you insert the syringe. The best way to test the ink is to use a tooth pick to poke into the hole. This way you can have the color appear onto the tooth pick and you'll be able to put the right color in the hole. Another tip is to make sure that you clean the syringe between each color you are refilling. Refilling your Hp21 inkjet cartridge has never been easier. If you are uncertain about filling the cartridge yourself you can always take it to stores that offer this type of service. You will soon notice that refilling is easy and inexpensive. |
